Page 1 of 1

General export from Nicelabel to the IPL code

Posted: Fri Sep 23, 2016 4:40 pm
by zetor
Dear all,

I am trying to use the Intermec PC43t to print the label. I have done the design in the Nicelabel and trying to use the Export option to get the IPL code. But what i get is something like in the attached file(intermec_sample3.txt).

I do not see there the standard <STX> commands and the file looks rubbish to me. Obviously the printer is not reacting when sending the file.

I have installed the proper printer in the Nicelabel in same way i did for other printers like Zebra and Datamax (for both of them i get the nice code ZPL/DPL).

Can you please let me know why Nicelabel is not generating the proper IPL code ?.
Any feedback is highly appreciated !
regards Piotr

Re: General export from Nicelabel to the IPL code

Posted: Wed Sep 28, 2016 1:24 pm
by Saso
It looks like you have installed incorrect driver for your printer.
PC43t can have IPL or DP firmware. Driver exists for both.

Your sample file contains DP commands.

Re: General export from Nicelabel to the IPL code

Posted: Thu Sep 29, 2016 9:40 am
by zetor
thank you very much Saso for the response ! :)

I am sure it has to be something simple :):) Below is the list of drivers we do have installed in Nicelabel:
https://lh3.googleusercontent.com/-JMrN ... -09-29.png

Screen is as well attached to the post.

We are using Intermec PC43t (203dpi) - IPL. Can you please advise which driver we should use ?.

once again thank you very much for your help !
regards Piotr

Re: General export from Nicelabel to the IPL code

Posted: Thu Sep 29, 2016 3:21 pm
by boermansjo
Have you tried the Intermec PC43t (203 dpi) - DP driver ?
Saso mentionned that the sample file uses DP commands. If you use the IPL driver, this can cause problems.

Re: General export from Nicelabel to the IPL code

Posted: Thu Oct 27, 2016 3:29 pm
by zetor
Hi all,

First of all thank you very much for the advises. Indeed the driver was the problem.

I have changed the driver to be DP and this solved the issue :)

regards Piotr

Re: General export from Nicelabel to the IPL code

Posted: Wed Mar 06, 2019 9:05 pm
by jberrutti
Hello everyone,

Sorry if I am confused but I am trying to do the same thing.

I want to design a label for an Intermec PD41/42 printer without the need of having the fisical printer with me. So I have two options: previewing my IPL commands graphically, or creating a label graphically and export it to IPL commands.

Is any of these posible with NiceLabel Pro?

Thanks in advance.

Re: General export from Nicelabel to the IPL code

Posted: Wed Mar 06, 2019 10:24 pm
by Kyleodonnell
jberruti,

You can do a print to file when in Nicelabel 2019 and it will output the label and values as a .PRN file containing the IPL commands. If you are still having issues, please open a support ticket https://www.nicelabel.com/support/technical-support