Konica Minolta 1052

Issues related to using NiceDrivers thermal printer drivers

Moderators: Georges, milos, NiceLabel Support Team

Post Reply
thanhhon.tech
Newcomer
Posts: 5
Joined: Sat Feb 18, 2012 5:19 am

Konica Minolta 1052

Post by thanhhon.tech » Tue Jun 24, 2014 9:36 am

Dear support Team,

I have some problem with driver for Konica Minolta 1052, when i open the label with this printer that the paper size is change, for example : i design 3 rows, 4 columns. But when i open with Konica driver that it show 2 rows and 4 columns.

Can you support me this problem ?

Matt
NiceLabel
NiceLabel
Posts: 185
Joined: Mon Apr 28, 2014 10:56 pm

Re: Konica Minolta 1052

Post by Matt » Wed Jul 16, 2014 11:21 pm

Hello,

A few recommendations:
Make sure you have the latest driver installed for your printer

Make sure your NiceLabel software is up to date:
http://www.nicelabel.com/downloads/nice ... signer-pro

Create your label for that printer and select "Use custom printer settings saved in the label"
(this is the default setting when creating a new label)

Do not specify a "Stock type" in your label design but rather enter the Width and Height (of each individual label on the sheet) in the "Dimensions" area of the "Label Setup" (File->Label Setup)
Then specify "Row" and "Columns" pertaining to number of rows and columns on your sheet of labels.

If the problems persist, you can provide your label design file to your regional Support Center
http://www.nicelabel.com/support/technical-support
so a technician may best advise.
NiceLabel
Image

thanhhon.tech
Newcomer
Posts: 5
Joined: Sat Feb 18, 2012 5:19 am

Re: Konica Minolta 1052

Post by thanhhon.tech » Thu Aug 28, 2014 10:48 am

Hello Matt,

Thanks for your information, i use Nice label version 5.2.3 build 4024.
i try to update with demo version.

Post Reply