[BUG] default parameter for a printer

Software technical issues not related to any of the other categories

Moderators: Georges, milos, NiceLabel Support Team

Post Reply
ikeas
Enthusiast
Posts: 7
Joined: Tue Jul 31, 2018 2:00 pm

[BUG] default parameter for a printer

Post by ikeas » Wed Aug 01, 2018 3:38 pm

hello

when i define a defaut parameter for a printer like
- print by default
- adcanced
- in support type
-' echenillage' in french
and define this 'echnillage' to 3mm

when i use Nice label this parameter is not set to 3mm ...

i think it's bug because the default parameters for a printer are not really read

have you a solution ?

ikeas
Enthusiast
Posts: 7
Joined: Tue Jul 31, 2018 2:00 pm

Re: [BUG] default parameter for a printer

Post by ikeas » Wed Aug 01, 2018 3:43 pm

in reality i muste set (in french)
support type to "echennillé"
and 'echenillage' to 3 mm
and in option form
set print mode to 'pré decollement' (in french)
print optimization
to
force optimization for all software
et check : optimize picture optimisation

User avatar
Saso
NiceLabel
NiceLabel
Posts: 2937
Joined: Mon Sep 04, 2006 8:09 am
Contact:

Re: [BUG] default parameter for a printer

Post by Saso » Thu Aug 02, 2018 8:53 am

If I understand correctly, you have adjusted the properties in the printer driver, but when you print a label using this driver the defined properties are not applied?

By default, NiceLabel does not read the properties from the printer driver. Instead, it remembers them from the time you designed the label. The label remembers the printer driver settings. This is useful, when you print the label from some other computer as the settings travel with the label.

The other option is to read the printer driver settings each time you open the label. In this case, the changes you do directly in the printer driver will influence the printing.

The switch controlling this behavior is available in the Label Properties (double click the label).

I hope this addresses your problem.
There is also a French section in this forums, if you would like to post your message in French.
Attachments
screenshot.png
screenshot.png (31 KiB) Viewed 753 times
Saso Fleiser
Senior Technical Product Specialist

ikeas
Enthusiast
Posts: 7
Joined: Tue Jul 31, 2018 2:00 pm

Re: [BUG] default parameter for a printer

Post by ikeas » Thu Aug 02, 2018 9:09 am

ok i ok for Nice Label softwae but if i try to use SDK for programming
i have

Code: Select all

ILabel label = PrintEngineFactory.PrintEngine.OpenLabel("label name.nblb");
label.PrintSettings.MonitorSpoolJobStatus = true;
label.PrintSettings.PrinterName = SelectedPrinter.Name;        
label.Print(10);
the label "label name.nblb" is used by many printer with differents parameters
how i can configure printer at runtime with default parameters ?

ikeas
Enthusiast
Posts: 7
Joined: Tue Jul 31, 2018 2:00 pm

Re: [BUG] default parameter for a printer

Post by ikeas » Fri Aug 03, 2018 6:56 am

OK It's works
but in the printer i have now
"syntax error no massicot'

but in label property i have not activated massicot

sorry it's an, error in configuration by default for printer

IT'S WORK PERFECTLY (how to mark as solve ?)

Post Reply